Industry Info

What is the correct operating procedure for a self-propelled stacker?

2024/03/19
  

The self-propelled overturning machine is used for the fermentation and overturning of organic waste such as livestock and poultry manure, sludge garbage, sugar factory filter mud, residue cake, and straw sawdust. It is widely used in the fermentation and moisture removal operations of sludge garbage plants, compound fertilizer plants, organic fertilizer plants, horticultural fields, and mushroom cultivation plants. Suitable for aerobic fermentation, with high efficiency, smooth operation, durability, and even flipping.

What is the correct operating procedure for a self-propelled stacker?

1. Grasp device functions. Understand the operating methods, protection methods, production capacity, and application scope of the self-propelled tipping machine, understand the effectiveness of all equipment controllers and alarm devices, and be sure to carefully read the "warning" instructions. Pay attention to the safety accidents that may occur if the organic fertilizer equipment continues to operate under low pressure, high temperature, and other conditions.

2. Pay attention to production details. No one is allowed to pass through the front and back of the self-propelled stacker during production; Before driving, the alarm should be sounded and personnel should stay away from the machine to prevent accidents. During production, maintenance or adding lubricating oil is not allowed. When flipping the pile, it is necessary to walk at the prescribed speed and not exceed the speed limit. Non operators of this machine are not allowed to operate the machine without authorization.

3. Understand the operating procedures. The safe production of a self-propelled stacker depends on the careful operation of the operator and the grasp of the technical functions of the equipment. Therefore, it is the responsibility of each operator to understand and grasp the operational requirements of the stacker, the accident hazards and preventive measures at the work site, and to discuss such issues with management personnel.

4. Inspection before starting. Before starting the self-propelled stacker, it is necessary to acknowledge the safety and undamaged operation of the protective device, check whether the oil circuit system is normal and whether there is any oil leakage, check whether all components inside the stacker are securely fastened, and ensure that there are no hidden dangers before starting the equipment.

5. Precautions during maintenance. Cut off electrical circuits: Before conducting any maintenance work on the stacker and any components, it is necessary to cut off the power supply of all electrical controllers. Then check the hydraulic station to ensure that the hydraulic system has been depressurized. Hang warning signs: When repairing the stacker, be sure to inform the operators and nearby workers, and hang warning signs with the words "repair in progress" to prevent others from starting the machine during the repair process, otherwise it will cause incalculable safety accidents.

PRODUCTS List+
Products
Tel
contact
inquiry