What should be paid attention to when using compound fertilizer equipment pelletizer

The fertilizer equipment pelletizer is designed and manufactured by the Tianci factory according to the actual needs of customers, and is dedicated to the NPK fertilizer production line. The disc granulator model specifications range from 1000 mm to 4000 mm in diameter, and the material can be divided into stainless steel, carbon steel, etc., and can also be designed as an electric heating mode according to customer needs. During the granulation process, the materials are accelerated to dry, especially suitable for granulation of relatively viscous materials.

Disc granulation of fertilizer equipment

1.The compound fertilizer disc granulator machine is composed of big plate, big gear, transmission side, frame, base, scraper frame, non power scraper, etc. The layout of the disc pelletizer is novel and reasonable, with reduced weight and height.

2.NPK fertilizer production layout is flexible and convenient, suitable for existing fertilizer plant innovation.

3.The tilt angle of the large plate is adjustable. The angle gasket and high-strength screw bolt are used for adjustment, which is flexible and convenient.

4.The disc granulator adopts the non power combination scraper integration to reduce the auxiliary power. The large disc is composed of disc body and disc section. Reduce electrical power. The disc joint can be adjusted up and down along the disc body.

5.When the material ball is out of the disc, it can ensure that the material ball is not pulled or torn. With the new desilting design, the edge and bottom are cleaned by the combination scraper without power, the angle is cleaned by the scraper, and the angle is wound up by the scraper. With the disc body disposal technology, the desilting and balling effect is good, and there will be no big mud mass and ball diameter.

The functions and specifications of the organic fertilizer granulator are mainly determined by the output, as well as the production capacity of the compound fertilizer project and the matching requirements of the organic fertilizer equipment. The diameter of the disc pelletizer is related to the production capacity. The larger the diameter, the greater the output. However, after the diameter of the granulator exceeds 4.5 meters, there are certain difficulties in production. Once the diameter of the pelletizer is determined, the disc height can be basically determined. Generally speaking, the larger the diameter, the higher the disc height, but the disc height can affect the granulation time of the material on the disc. These basic parameters of the disc granulator are all problems that should be paid attention to in the production of NPK compound fertilizer.